Mass Spectrometry & Gas Analysis
The control of the vacuum as well as the control of gas flows is a core element of mass spectrometry and gas analysis. Precise shut-off and control, o...
Read more
When the Footprint Requires an Alternative to a Gate Valve
The 21.0 Butterfly Valve provides the same reliable vacuum isolation that standard gate valves provide with the advantage of a lower footprint requirement. The butterfly principle combined with the compact actuator designs allows installations situations with very limited space.
In differential pressure conditions, the valve is fully operational.
Already installed in thousands of demanding applications under various process conditions, the 21.0 series has proven its outstanding reliability. With a robust design as well as reduced and easy maintenance, the 21.0 series convinces in all aspects.
The 21.0 Butterfly Valve has proved to be especially well suited as vacuum pump isolation valve.
21.0 Butterfly Valve series is available in stainless steel, with standard flange connectors in ISO-F for DN 63 - 160mm (2½” - 6”) as well as ISO-F and ISO-K flange connectors for DN 250mm (10”). Ports for roughing (by-pass), venting or gauges can be integrated.
The sealing material for the bonnet and plate seal is FKM.
Key features of the 21.0 Butterfly Valve
Features:
- Compact design
- Operational under differential pressure
- Reliable operation
- Low maintenance
Benefits:
- Small footprint
- High up-time
- Low cost of operation
Technical data
| Sizes | DN 63 (2½"), DN 100 (4"), DN 160 (6"), DN 250 (10") | ||
|---|---|---|---|
| Actuator | Pneumatic | Double acting | |
| Manual | With Turning Lever | ||
| Body Material | Stainless Steel | ||
| Feedthrough | Rotary | ||
| Standard Flanges | DN 63 – 160 | ISO-F | |
| DN 250 | ISO-F, ISO-K | ||
| Leak Rate | Valve Body | < 1 × 10-9 mbar ls-1 | |
| Valve Seat Manual Actuator | < 5 × 10-9 mbar ls-1 | ||
| Valve Seat Pneumatic Actuator | < 1 × 10-9 mbar ls-1 | ||
| Pressure Range | Manual Actuator | DN 63 – 100 | 1 × 10-8 mbar to 4 bar (abs) |
| DN 160, 250 | 1 × 10-8 mbar to 1.3 bar (abs) | ||
| Pneumatic Actuator | DN 63 – 250 | 1 × 10-8 mbar to 1.3 bar (abs) | |
| Differential Pressure on the Gate | Manual Actuator | DN 63 – 100 | ≤ 4 bar |
| DN 160 | ≤ 1.3 bar | ||
| Pneumatic Actuator | DN 63 – 100 | ≤ 1.3 bar | |
| Differential Pressure at Opening | ≤ 1.3 bar | ||
| Cycles until first Service | Manual Actuator | DN 63 – 160 | 100 000 |
| Pneumatic Actuator | DN 63, 250 | 1 Million | |
| DN 100, 160 | 1.5 Million | ||
| Temperature | Valve Body | ≤ 150 °C | |
| Actuator | ≤ 80 °C | ||
| Solenoid Valve | ≤ 50 °C | ||
| Position Indicator | ≤ 80 °C | ||
| Material | Valve Body, Gate, Shaft | AISI 304 (1.4301) | |
| Seal | Bonnet, Gate | FKM | |
| Mounting Position | Any | ||
| Solenoid Valve | 24 VDC, 5.7 W, normally closed (NC) (others on request) |
||
| Position Indicator: Contact Rating | Voltage | ≤ 50 VAC / 5 – 30 VDC | |
| Current | 0.1 A |
