Variable for Any Requirement

The key performance indicators for angle valves are reliability and variability. The 24.4 Angle Valve series combines both. The series has been designed to allow the construction of large sizes for high and even slightly contaminated gas volume flows. Sizes of up to DN 800 mm (32") have been produced so far.

Tested in thousands of demanding applications under various process conditions the 24.4 series has proven its outstanding reliability. With its various design options in actuation, flanges connection, body material or sealing, nearly every requirement can be met.

The 24.4 is ideal for the pumping and venting of vacuum systems. It resists high differential pressure and its modular design means it can be adjusted to various process and operation requirements. The 24.4 is designed for outstanding reliability and a long lifetime.

VAT 24.4 Angle Valve - Manual
Manual
VAT 24.4 Angle Valve - Pneumatic
Pneumatic
VAT 24.4 Angle Valve - Pneumatic
Pneumatic

Manual: DN 10 – 80

VAT 24.4 Angle Valve - Manual closed
Closed
VAT 24.4 Angle Valve - Manual open
Open

Pneumatic (NC): DN 10 – 160

VAT 24.4 Angle Valve - Pneumatic closed
Closed
VAT 24.4 Angle Valve - Pneumatic open
Open

Based on a reliable and robust core design the 24.4 Angle Valve offers a high verity of design options for actuation from manual to pneumatic. In sizes from DN 10 to DN 800 mm (0.4" – 32") the 24.4 can be selected in aluminum or stainless steel in various specifications. The “all aluminum” solution provides advantages in selected applications with corrosive gases.

The standard options for flange connectors are ISO-KF and ISO-K. A visual position indication comes as standard although an electrical indicator can be added as an option. The valve can be controlled by a solenoid valve either “on board” or in a distant location if required. The 24.4 can be used in different temperature regimes depending on the sealing elastomer chosen. The valve can be supplied as normally opened (NO), normally closed (NC) or double acting. In addition to these standard options further customization is possible.


Key features of the 24.4 Angle Valve

Features:

  • Large number of design options
  • Resistance against high differential pressure
  • Long maintenance free cycle

Benefits:

  • Outstanding reliability especially in large DN
  • Adjustable to various requirements
  • Low cost of ownership
Technical data
Sizes     DN 10 (⅜"), DN 16 (⅝"), DN 25 (1"), DN 40 (1½"),
DN 50 (2"), DN 63 (2 ½"), DN 80 (3"),
DN 100 (4"), DN 160 (6"), DN 200 (8"), DN 250 (10")
Actuators Manual   With Removable Handwheel
  Pneumatic   Single acting with Closing Spring (NC) or
Single acting with Opening Spring (NO) or
Double acting
Body Material     Aluminum or Stainless Steel
Feedthrough     Shaft Feedthrough
Standard Flanges     ISO-KF, ISO-K
Leak Rate Valve Body, Valve Seat   < 1 × 10-9 mbar ls-1
Pressure Range   DN 10 – 50
DN 63 – 80
DN 100 – 160
DN 200 – 250
1 × 10-7 mbar to 5 bar (abs)
1 × 10-7 mbar to 4 bar (abs)
1 × 10-7 mbar to 2 bar (abs)
1 × 10-7 mbar to 1.6 bar (abs)
Differential Pressure on the Plate In Opening Direction
In Closing Direction
DN 10 – 50
DN 63 – 250
DN 10 – 50
DN 63 – 80
DN 100 – 160
DN 200 – 250
≤ 2.0 bar
≤ 1.2 bar
≤ 5.0 bar
≤ 4.0 bar
≤ 2.0 bar
≤ 1.6 bar
Differential Pressure on the Plate     ≤ 1 bar
Cycles until first Service Manual Actuator
Pneumatic Actuator
DN 10 – 80
DN 10 – 80
DN 100 – 160
DN 100 – 160
DN 200 – 250
10 000
3 million (NC, NO)
1 million (NC, NO)
2 million (double acting)
1 million (double acting)
Temperature

Valve Body
Actuator
Solenoid Valve&Position Indicator




DN 10 – 80
DN 100 – 250
≤ 150 °C
≤ 120 °C
≤ 80 °C
≤ 50 °C
Material Aluminium


Stainless Steel 
Plate
 
DN 16 – 63

DN 80 – 160
DN 10 – 250
DN 10 – 160
DN 200 – 250
EN AW-6060 (3.3206), EN AW-6061 (3.3211),
EN AW-6063 (3.3206), EN AW-6082 (3.2315)
EN AC-42000
AISI 316L (1.4404)
AISI 316L (1.4404, 1.4435)
AISI 304 (1.4301)
Seal Bonnet, Plate    
Mounting Position     Any
Solenoid Valve   DN 10 – 80
DN 100 – 250
24 VDC, 2.5 W (others on request)
24 VDC, 1.0 W (others on request)
Position Indicator: Contact Rating

Voltage

Current
 

DN 10 – 160
DN 200 – 250
DN 10 – 160
DN 200 – 250
5 – 50 VAC / DC
≤ 50 VAC / DC
5 – 100 mA
≤ 1.2 A
Valve Position Indication     Visual (Mechanical)

 

Scroll to:
Scroll to:
Specify standard product

Get to the product details to specify your requirements to get a quote or to get a specific CAD data download.

Customized Solution

Specify your customized solution.

If you have your specification already at hand, please upload it and submit it to us. We are happy to send you a quote.

Selected Applications

Explore all applications